How to play Minefield: the mine-finding puzzle, rules and patterns
A grid hides mines. Open a square and it shows how many mines touch it. Use those numbers to work out where every mine is and open every safe square. Here are the rules, board sizes and the patterns that crack them.
By our team. Published . 1 source.
Minefield is Parlour's name for the classic mine-finding logic puzzle that has shipped on computers since the early 1990s [1]. A rectangular grid of covered squares hides a known number of mines. You open squares one at a time. Open a mine and you lose. Open a safe square and it shows a number: how many of the eight squares around it hold mines. Use those numbers to work out where every mine is, and open every safe square to win [1].
It looks like luck at first. It is almost all logic: with practice, most of a board can be solved by reading the numbers, and good versions guarantee that all of it can.
The board
Three sizes are standard [1]:
| Level | Grid | Mines | Mine density |
|---|---|---|---|
| Beginner | 9 by 9 (8 by 8 in some versions) | 10 | about 12% |
| Intermediate | 16 by 16 | 40 | about 16% |
| Expert | 30 by 16 | 99 | about 21% |
Many versions also let you set your own size and mine count [1]. The more crowded the board, the more often logic runs out and a guess is needed.
The rules
- Open a square by tapping or clicking it. If it hides a mine, the game is over [1].
- Read the number. A safe square shows how many mines touch it, counting all eight neighbours: above, below, left, right and the four diagonals [1].
- Blank squares spread. A square with no neighbouring mines shows nothing, and all the squares around it open automatically. That is why one lucky tap can open a large area [1].
- Flag the mines. Mark a square you are sure hides a mine with a flag (right-click, or long-press on a phone) [1]. Flags stop you opening it by accident. The mine counter shows mines minus flags, so it can go negative if you flag too many [1].
- Chord to save time. When a number already has that many flags around it, chording opens all its other neighbours at once [1]. If one of your flags is wrong, this will open a mine, so only chord on flags you are sure of.
- Win by opening every square that is not a mine. You do not have to flag the mines.
The first move
Many versions make the first click safe, and some go further and make sure it opens an area, so there is always something to work from [1]. On older versions without this rule, the first click could be a mine.
How to read the numbers
Every deduction comes from two simple rules:
- All mines found: if a number already touches that many flagged mines, every other covered square around it is safe.
- All squares are mines: if a number touches exactly that many covered squares, every one of them is a mine.
Look along the edge of the opened area, where numbers meet covered squares. That edge, called the frontier, is where all the work happens.
Patterns worth learning
These come up on almost every board. Read each one along a straight wall of covered squares.
| Pattern along a wall | What it means |
|---|---|
| 1-1 starting at a corner or edge | The square beyond the second 1 is safe |
| 1-2-1 | The squares opposite the two 1s are mines; the square opposite the 2 is safe |
| 1-2-2-1 | The two squares opposite the 2s are mines; the ones opposite the 1s are safe |
| A 1 touching only one covered square | That square is a mine |
| A 2 touching only two covered squares | Both are mines |
Learning these lets you clear large stretches of frontier without working each square out from scratch.
When you need more than one number
Sometimes no single number settles anything. Then compare two neighbouring numbers. If a 1 touches squares A and B, and a 2 next to it touches A, B and C, then C must be a mine: the 2 needs one more mine than the 1 can account for. This subset reasoning cracks many positions that look stuck.
Near the end, use the mine counter. If three mines are left and only one way to place three fits the numbers, that settles the last squares.
Guessing
Working out whether a set of numbers is even consistent with some placement of mines is a hard problem in computer science: it has been proved NP-complete [1]. On crowded boards, some positions cannot be solved by logic at all, and you have to guess [1]. If you must guess, choose the square least likely to be a mine, usually one away from high numbers, or one in an open corner that might open an area. Some versions, including Parlour's, can generate boards that never need a guess.
Tips
- Work the easy edges first. Clear every certain square before you think about anything that might need a guess.
- Flag only what you need. Flags help with chording and avoid slips, but you can win without them.
- Slow down near the end. Most losses come from a careless tap in the last few squares.
Common questions
- What do the numbers mean in a mine-finding game?
- Each number is the count of mines in the eight squares around it, including diagonals [1].
- Is the first click always safe?
- In many versions, yes, and some also make the first click open an area [1]. In Parlour's Minefield your first tap always opens an area.
- What is chording?
- Opening all the other neighbours of a number in one go once it has the right number of flags around it [1]. It is fast, but a wrong flag will make it open a mine.
- Do you have to flag every mine to win?
- No. You win by opening every safe square. Flags are only there to help you.
- Do you ever have to guess?
- On a random board, sometimes: some positions cannot be solved by logic, especially on crowded boards [1]. Boards made to be solved without guessing remove that.
Sources
Checked on 11 November 2026.
- 1.Wikipedia, the classic Windows mine-finding game (rules, board sizes, chording and complexity): https://en.wikipedia.org/wiki/Minesweeper_(video_game)